Add to Bookmarks

PARTSNGO has many years of experience in auto body parts, auto accessories, and motorcycles parts. We have best connections with parts manufacturers in order to get parts from the cheapest source to bring best prices to our valued customers.

If you have any questions, please email us and we will reply shortly. 

Installation for led tail light

We carry In Pro Car Wear (Crystal Eyes) products. Their LED tail lights are

• Unique design.
• Next generation of lighting technology
• Respond faster.
• Last longer (up to 20,000 hours longer than incandescent bulbs.
• Brighter light means more visible, add safety.
• Complement to any vehicle style.
• Street legal - SAE and DOT approved.
• No modify require.
• Simply screwdriver (all you needed)
• Plug and play

Step 1:

Unscrew any screws that hold the tail light. Usually there are between 2-3 screws, depending on makes and model. Then remove your OE tail light form your vehicle gently.

Step 2:

Remove all the bulbs on the tail light by turning counter clockwise. (When removing bulbs, be gently and don't ever pull the wire. It will damage the wire and might cause burning.) If you are not able to remove by hand. Please use tool or check with your vehicle user guide

Step 3:

Remove all bulbs from wire harness, install the wire to the new LED tail light. (extra wire might needed, depending on makes and models.) When you lock the harness in place, don't put too much pressure. It will damage the housing and might cause moisture to get in. Just gently turn and make sure it is secure in place.                                                                                                                      If you want to know more, please visit this link (What caused the moisture stay inside the tail lenses)

Step 4:

Slide in the LED tail light in place and secure by tighten the screws.

Step 5:

You are done and enjoy your new purchase from Partsngo.